Terms of service

Terms of Use

Regarding use

Spring calculation program, Torque coil simplified specification calculation program, PTP sheet dimension calculation program

Even if you use these programs, we cannot guarantee that it will be possible to manufacture products based on the calculation results.

Mnet24

Depending on the specifications you provide, we may not be able to manufacture your order. If we are unable to manufacture your order, we will contact you by email. Thank you for your understanding.

Disclaimer

The spring calculation program, torque coil simplified specification calculation program, and PTP sheet dimension calculation program are all proprietary developments and provided by our company. While we strive for accuracy in the calculation values ​​of each program, we do not guarantee their content. Please understand that we cannot be held liable for any damages resulting from the use of these calculations.

Handling of Personal Information

We recognize the importance of personal information obtained from our customers through this website and will handle it appropriately based on the following policy.

  • Our company will manage our customers' personal information appropriately and strictly, and will take necessary security measures to prevent unauthorized access, loss, destruction, alteration, leakage, etc.
  • Your personal information will be used for providing and operating this service, responding to inquiries, estimating, manufacturing, and delivering prototypes, providing support, improving quality, and informing you about our products and services.
  • We will not provide personal information to third parties without the customer's consent. However, this does not apply if disclosure is required by law, a court, or an administrative agency.
  • Our company may entrust personal information to external service providers. When outsourcing, we select service providers who can appropriately protect personal information and enter into confidentiality agreements with them.
  • This website uses cookies for some services. For more information about the use of cookies, please see below.About cookies .
  • We accept requests from customers for disclosure, correction, addition, deletion, or suspension of use of their personal information at our designated contact point and will respond promptly within a reasonable scope.

Membership Terms and Conditions | Internet Sales Transaction Terms

The following terms and conditions apply to prototypes ordered by customers via the internet. Please note that we only handle domestic transactions.

一般条件

All sales of products to members will be conducted in accordance with these terms and conditions.

Membership Registration

Please fill in the required information on the membership registration application page and submit your application.

Membership qualification

Membership registration for this service is for corporate clients only. Membership is granted upon issuance of a user ID by our company.

User ID and password

If our company approves your membership registration, we will issue you a user ID and password. Members are responsible for properly managing their user ID and password and will not transfer, lend, or allow any third party to use them.

Loss of membership, etc.

If a member falls under any of the following categories, we may revoke their membership without prior notice or warning.

  • If you interfere with the operation of this service or damage our reputation or credibility,
  • If it is discovered that there are false statements in the membership registration information
  • If your user ID or password is used illegally
  • If you violate any of these terms and conditions

Price

The listed price for the prototype does not include consumption tax or shipping costs. Consumption tax will be added separately to the prototype price and shipping costs.

order

Please place your order based on the unit prices and lot sizes listed in our price list or quotation. We will contact you by email within 24 hours of receiving your order (excluding our company holidays) to inform you whether your order has been accepted. If you do not receive an email after 24 hours, your order may not have reached us, so please contact us.

発 送

We will promptly ship the prototype after accepting your order.

In the event of delays in inspection, transportation, or delivery,

  • The customer shall inspect the prototype promptly after delivery. If the prototype has any defects or problems, please contact us with details within 8 days of delivery.
  • If we do not receive any contact from the customer within 8 days of delivery, the prototype will be deemed to conform to the contract and be free of defects. If we acknowledge any discrepancies or defects in the prototype, the customer may choose to either replace the prototype or receive a refund.
  • If there are any shortages in the prototypes you received, please contact us within 8 days of delivery. After confirmation, we will promptly ship the missing items. If you do not require the missing items, we will discuss and decide on a separate course of action. Please note that we will not be held liable for any damages resulting from delays in prototype delivery.

Shippings

Shipping costs are the responsibility of the customer and should be paid upon arrival of the prototype. However, this does not apply to customers with whom we have established separate terms and conditions.

responsibility

Our company shall not be liable for any damages arising from defects in prototypes or discrepancies with specifications.

Returns

If you wish to return a prototype due to defects or other issues, please contact us at the address below within 8 days of delivery. Prior approval from our company is required before returning any prototypes. We will cover the shipping costs for returns. Please properly pack any prototypes you wish to return and send them to the address below.

Spring Division related

Zip code:621-0015
12-1 Iwanoue, Yoshida, Yoshikawa-cho, Kameoka City, Kyoto Prefecture
Maruho Spring Industry Co., Ltd. Kameoka Plant
Spring Division, Spring Sales Group, Sales Operations Team

TEL: 0771-25-8954

Medical Device Parts Division related

Zip code:622-0021
22 Kyoto Shinkoetsu Village, Uryuno, Sonobe-cho, Nantan City, Kyoto Prefecture
Maruho Spring Industry Co., Ltd. Shinkoetsu Factory 
Medical Device Parts Division, Sales Group

TEL: 0771-86-9912

Order cancellation

You may cancel all or part of your order before we accept it. Once we accept your order, you generally cannot cancel it.

Delivery delay

We will do our best to deliver the prototype by the date agreed upon with the customer. However, in the event that the delivery of the prototype is delayed or impossible due to natural disasters or other reasons beyond our control, we will not be liable for any damages incurred as a result.

Legal Choices

All agreements between our company and our customers shall be interpreted in accordance with Japanese law.
In the event that a dispute arising from the sale of prototypes cannot be resolved through negotiation, the Kyoto District Court shall have jurisdiction.

Contact Us

For inquiries regarding Mnet services, please contact the following support desk.

Inquiry window

Contact Zip code:621-0015
12-1 Iwanoue, Yoshida, Yoshikawa-cho, Kameoka City, Kyoto Prefecture
Maruho Spring Industry Co., Ltd. Kameoka Plant
Email Address Maruho-HP@maruho-htj.co.jp

Contact

For inquiries, questions, or requests for quotes regarding our services, please contact us.
Please feel free to contact us.

About spring products

Spring Division

0771-25-8954

9:00 AM - 17:00 PM (Closed on Saturdays, Sundays, and public holidays)

Contact Us

About packaging machines

Machinery Division

0771-55-9901

9:00 AM - 17:00 PM (Closed on Saturdays, Sundays, and public holidays)

Contact Us

Regarding medical device components

Medical Device Parts Division

0771-86-9911

9:00 AM - 17:00 PM (Closed on Saturdays, Sundays, and public holidays)

Contact Us